YES, we are interested. Kindly sent more information & quotation of your product
“Innovative Technology for the Pharmaceutical, Food, Cosmetic and Fine Chemical Industries”
| Base Unit | • 304 stainless steel construction, 316 stainless steel contact parts · Unit polished to an average 150 grit “satin” finish; all welds cleaned and polished; all material contact welds ground flush and polished • 17-3/4″ Ø (450mm) receiving hopper with sanitary Tri-clamp inlet connection. • Tangential inlet for gentle product flow into hopper • 4-3/4″ Ø (220 mm) dump gate activated by air cylinder • 15-3/4″ Ø (400 mm) x 3″ (76 mm) long detachable (quick disconnect clamp) discharge shroud with beaded collar for easy dust sock connection. • Filter cap attached with quick disconnect clamp, supplied complete with conical, high efficiency, dual density polyester filter and automatic intermittent filter backwash. • Includes 10′ (3.0 m) of 1/2″ Ø (12 mm) filter backwash hose with quick disconnect to Q-Vac • Stainless steel control panel with adjustable air logic controls • 1-1/2″ Ø (38 mm) stainless steel pick-up wand with adjustable make-up-air valve. • 2″ Ø (51 mm) vent line pipe. • Single pin, swivel mounting bracket · Approximate size 17-3/4″ x 17-3/4″ x 32-1/2″ (450 mm x 450 mm x 825 mm) • Hopper product capacity of approximately 0.70 cubic feet (20L) • One operation and Maintenance Manual |
| Vavuum Pump | Model U4.70SA/K. Oil lubricated rotary vane pump, complete with 3.0Hp, 415V/3Ph/50Hz, TEFC, NEMA C flange motor, manual starter UL approved, inlet filter mounted on 90 degree angle, vent valve assembly, vacuum relief valve and pressure gauge, 49 CFM (83CMH) at 20″Hg. Maximum noise level of 69 dBA. |
| Base – Portable Stand | Complete with base plate for pump mount, pushbar for mounting of air-logics control panel and single pin with swivel mounting device. Constructed of 304 stainless steel. Includes assembly and fitting of pump (if applicable). Discharge height manually adjusted (without crank – require minimum of 2 operators) from 0″ – 55″ (0-1400 mm). Reference sketch. |
| Conveying hose | 10 feet of 1-1/2″ Ø (38 mm) anti-static conveying hose for connection between the pick-up wand and the Comil inlet. 10 feet of 1-1/2″ Ø (38 mm) anti-static conveying hose for connection between the Comil discharge and the Q-Vac inlet. |
| Ventline hose | 10 feet of 2″ Ø (51 mm) flexible hose for connection between the Q-Vac vent pipe and the pump inlet. This is assuming the pump will be located not more than 10 feet from the Q-Vac receiver. |
| Spares Package | Recommended spares kit complete with (1) conical dual density polyester filter; (1) air cylinder; (1) dumpgate plate with bonded gasket; (2) dumpgate bushings. |
ONE Q-Vac with pump, base and hoses
OPTIONAL COMPONENTS AND /OR FEATURES
- ONE Spare Part Package
- ADD 1-1.2″ (38 mm) Hose (#765025) PER FOOT
- ADD 2″ (51 mm) Hose (#765026) PER FOOT
PRICE US 00,000.00