Need quotation!!!, please email us
“Innovative Technology for the Pharmaceutical, Food, Cosmetic and Fine Chemical Industries”
| Construction | 304 stainless steel with 316 stainless steel product contact parts. |
| Surface finish | Average 150 grit (Ra 1.06 m) surface finish throughout; welds cleaned and polished and all material contact welds ground flush and polished. |
| Infeed opening | 4 7/8″. (124mm). |
| Infeed chute | Tube chute with 6″ Triclamp inlet, with FDA compliant O-ring at machine housing and chute interface for dust/vacuum seal. Interlock switch with magnetic actuator to prevent operator access to rotating impeller if Comil is not connected to upstream equipment |
| Spindle assembly | With pre-lubricated, sealed bearings. (Optional – May be removed for direct coupling between motor and gearbox.) |
| Drive | Compact, sanitary stainless steel gearbox with gears designed for minimum backlash and optimum gear life. Gearbox output shaft equipped with a custom designed, FDA compliant, high performance seal on a plasma sprayed and ground shaft sealing surface for optimum wear resistance. Extra sanitary considerations include: integrated drain hole to drain any cleaning fluids, integrated centrifugal seal to reduce product migration, and FDA compliant Teflon sealing rings. |
| Impeller speed | Approximately 1500-3600 RPM with electrics package detailed below. Standard impeller speed is approximately 2400RPM. Consult Quadro for maximum allowable range for custom packages. |
| Impeller/Screen Gap | Closest possible, without the need for ANY adjustments. This eliminates the possibility of operator error which could result in metal to metal contact or poor operating performance. Note: Closest gap is CRITICAL for optimum Conical Screen Milling. |
| Discharge | 8″i (203mm) Triclamp outlet for easy connection to downstream equipment. Complete with grid mesh to prevent operator access to rotating impeller. |
| Stand | Standard ball screw height adjustable stand with 2″ square tube frame for mounting of frequency inverter (VFD) panel. Standard discharge height is 36-48″ (914-1219mm) from floor to housing outlet. Approximate overall dimensions are 54 5/32″L x 36″W (1376 x 914 mm). |
| Casters | Nickel chrome plated stem casters with solid elastomer, non-marking, gray wheels (2 swivel/brake & 2 rigid). |
| Motor | Not included. Recommended motor is 1.5 kW, 3000 RPM, 2 pole with 90L frame and B14 “C” flange. B3 feet are required for motor enclosure mounting. |
| Starter | Not included |
| Tooling | One round hole Screen and one standard Impeller, both manufactured in 316 stainless steel with 150 grit (Ra 1.06 Fm) surface finish. |
| Documentation | Two Operating & Maintenance Manuals. One English and one of: English, German, French, Dutch, Spanish, Italian or Portuguese. |
| Packaging | Wrapped in plastic for added protection, crated in sea-worthy crate. Approximate crated weight (without electrics) is 180 kg. |
NOTES:
- Please advise the relevant end-user’s electrical supply at the time an order is placed.
- Please note that a higher grade of material and/or surface finish polish may be substituted, for some or all parts, based on availability.
- Many optional features are available. Please consult Quadro or your local representative
PRICE US 00,000.00
Technical Specifications
| Motor Power | 1.0 HP – 30 HP |
| Capacities | 114 Kg/hr to 40,000 Kg/hr |
| Dimensions | Standard models or built to users’ process requirements |
| Stainless steel construction | Polished to surface finish required for application |
Design Options
| abrasion resistant coatings | contact parts available in hardened steels for wear resistance |
| USDA approved design | cryogenic design |
| Dual-stage milling | Vacuum/milling system |
| autoclavable option | pressure vessel design (up to 10 barg) |
| underdriven type (pipeline design) | pre-breakers |
| belt driven type | clean-in-place |
| direct driven type | – |